Skip to content
Atlas
Skip to Content
Help

When something is wrong

No Wi-Fi, the PC starts Windows instead of Atlas, a drive that will not open, a frozen app, a forgotten password, a slow PC.

Look for your case below. If nothing fits, report the problem: Atlas is a testing build, and that is how we learn.

No Wi-Fi

  1. Open quick settings (Super+A). Is the Wi-Fi tile on? Is Airplane mode off?
  2. If there is no Wi-Fi tile, or if Settings > Network says No Wi-Fi or wired network adapter was found on this computer., Atlas does not recognize this PC's Wi-Fi chip. Plug in a network cable if you can, and tell us the PC's model.
  3. Could not connect. Check the password and try again.: the key is wrong, or the network needs more than a password.
  4. Connected but nothing opens? In Settings > Network, the Proxy must be on None, unless your network requires one.

The details are in Network and devices.

A projector or second screen shows nothing

  1. Press Super+P, then Super+P again, then Enter. This works even while the projector's picture is still black: the Project panel picks Duplicate or Extend without you having to see it.
  2. Or open Settings > Display on the PC's screen and choose Extend these displays or Duplicate these displays.
  3. Duplicate needs a resolution that both screens have. If there is none, choose Extend.

The details are in Network and devices.

The PC starts Windows instead of Atlas

A Windows (an update, for example) can put itself back at the head of the start-up order.

  1. Restart and open the firmware's boot menu (the key depends on the maker: see the table in Try Atlas). Choose the Atlas entry, or Atlas (backup) if the first is missing: Atlas keeps a copy of its loader for this.
  2. Once in Atlas, an administrator sees Atlas is not first at start-up and the Put Atlas first button. Otherwise: Settings > Start-up, Put Atlas first, or Repair (which puts Atlas's entry and backup copies back). Nothing changes unless you choose it.
  3. If Windows and Atlas are on the same PC, Atlas shows a chooser at start-up with a tile for each system. See First start.

If the Atlas entry shows up in no menu, tell us: in this version, the USB stick does not yet have a repair tool (it is planned for later).

A drive or USB stick will not open

  • Windows left it hibernated (fast start-up): it opens read-only. Start Windows, choose Restart (not Shut down) or turn off fast start-up.
  • Encrypted (BitLocker, for example): open it in Explorer and type its password or recovery key in the Unlock window.
  • This drive couldn't be opened.: click Repair…, after copying anything important if you can.
  • The drive's file system isn't supported, or the disc can't be read.: the disk is damaged, or its format is not handled.
  • To remove a stick: Safely remove in Explorer, then unplug it.

See Explorer.

A USB stick or disk opens read-only

Atlas says Opened read-only: it wasn't closed properly the last time it was used. The files can be read and copied. Copy anything important, then click Repair… (on the notice, on the bar over the drive, or in the drive's menu). FAT and exFAT drives are checked and repaired; NTFS gets its most common problem fixed. A Windows left hibernated needs Shut Windows down fully to write to it. See Repairing a drive.

An app does not respond

  1. Wait a few seconds: it may only be busy.
  2. Open Task Manager (Ctrl+Shift+Esc), select it, then End task.
  3. If it does not stop, Atlas offers Force end. What is not saved in it is lost.

If everything is frozen, hold the power button until the PC switches off, then turn it on again. Tell us what you were doing.

I forgot my password

  • Another administrator opens Settings > Accounts, chooses your account and uses Reset the password.
  • If the only administrator forgot it, nothing in this version gets it back: there is no recovery mode (we turned it off for security) and no reset tool. A repair that resets an administrator's password is planned, not built yet. For now you have to install Atlas again, which erases what is on the disk you choose. So plan ahead: make two administrator accounts, or write the password down.
  • The password of an encrypted disk (asked before start-up) cannot be recovered either. See Encryption.
  • After 5 wrong passwords, Atlas makes you wait 2 minutes before you can try again.

The PC is slow

  • Open Task Manager, Performance page, and look at the memory: Atlas aims at 2 GB, and the browser is what weighs the most. Close the tabs and apps you do not need.
  • Settings > Accessibility > Animation effects: turn them off.
  • Each account open at the same time costs about 150 MB (see Several accounts): Switch user keeps the other session open.
  • Settings > Display > Graphics mode: Least memory draws with the processor, lighter on an old PC.
  • Settings > Power: the Best performance or Best power efficiency mode.

An app opened in a sub-account closes

Atlas tells you: Text Editor closed as soon as it opened. (or stopped unexpectedly., with the app's own name). Click Details to see the app's last error lines, and Copy to put them in a message to us. Software in a sub-account installs Flathub apps only. See Sub-accounts.

Other cases

  • Software says there is no list of apps: connect to the network, then Update the list.
  • No sound: Settings > Sound: is the Output device the right one, is the volume at zero, is Mute on? Test plays a sound.
  • The keyboard types the wrong letters: Settings > Mouse and keyboard, Keyboard layouts; Super+Space switches layout.
  • The screen stays black or garbled when starting from the stick: in the stick's menu, choose Atlas (safe graphics). See Try Atlas.